Yes, but shop around, they are a little higher, but they will get you the parts fast.

I also have a adjustable timer that has three I believe 110 v wires one is load , the other one is + sign and a - sign. its about a 1/2 to 3/4 inch thick and about 2 inches square . it has two little hand turn dials that adjust the auger run time from the bin to the elbow (these two dials one adjusts how long you want the auger to run from 2 seconds to 20 ON and the others OFF 2 seconds to 20 . this auger dumps into the fire pot auger (fire pot auger on mine runs all the time when calling for heat. maybe I can get a picture or info for you?

The brand of my furnace is actually Eco tech which was made by ldj. Its 150,000 btu. I've been trying to find the bushing that burn pot auger mounts through , any ideas?

Nogas wrote:



You need to call and talk to Mike. There is no information about the conversion kit on the web site.

There you go, call Mike, and he can get you the parts you need.

I think I might have the bushing you are looking for. Let me dig thru my stuff and I'll let you know.

Well I found the bushing. The original bushing on my LMF furnace was some type of plastic. I had to purchase a new bushing due to a burn back I had about two seasons ago. When I purchased the LDJ pellet kit it came with a bushing so I have an extra one. The bushing is machined aluminum. The O.D. is 2 1/8" with a 1/2" hole in the center for the auger. There are two holes taped with hex head screws about 5/16" in from each side. This would be the attachment to your auger box. There is also a hole taped with a hex head screw in the top that attaches to your copper tee. Let me know if this will work for you and we can work something out.

yes that will definately work. I can mail you a check. let me know?

Dan79, I sent you a private message, check your inbox.