Yes and no. You have the new style board, which has pellet AND corn settings programmed into it. I will do some digging tomorrow morning here and try to post how to make sure it is set to your particular stove.

It is fairly simple, just have to have the stove shut off and cool and you change settings by pushing some of the buttons on the front of the board.

Thanks. I went to google and found instructions how to program a board. It was set to program 2, I changed it to #1. No change.

Had enough time tonight to find out what it does. It starts, burns hot, so hot I can't touch the stove, then shuts down without ever seeing "proof of fire." #3 light blinks. I misspoke the other day, the blinking power light never does stop blinking. It won't come out of startup. POF switch was replaced last year and no, I don't remember what went first, the board or the switch.

Guy from Even-Temp who I have been emailing back and forth, suggested that I jump the pof switch. So I did. No change.

I traced the brown wires all the way back from the pof switch to the board. Wires are good and plug(s) look OK. No loose connections.

I still have no idea why the room fan comes on whenver I unplug the vacuum wires. Do you have a diagram of where each wire is supposed to be in the plug at the board?

Thanks for the help

Jake