Hey, does anybody able to help me out? Need new distribution motor, somewhere cheap, search on here won't work, does anybody have model numbers for ordering from grainger or others?
Thanks

I found this in the old forum. Hope it helps!
----------------------------------------------------------------------------------------

If you compare the Fasco part numbers to the AES corn stove part numbers you will see they are the same.
USSC 6039 is almost identical to the AES countryside and magnum models and use most the same parts.

MF3542 DRAFT INDUCER BLOWER
MF3541 CENTRIFUGAL BLOWER


AES parts. (note part numbers)
www.americanenergysystems.com/motors.cfm

AES Service Bulliten pdf
www.americanenergysystems.com/Stock/Libr...modelinformation.pdf

Burden Surplus Center.
www.surpluscenter.com/

This is the room fan. (AES part# MF3541)
www.surpluscenter.com/item.asp?Item=16-1386

This is the draft inducer fan. (AES Part #MF3542)
www.surpluscenter.com/item.asp?Item=16-1384

This is the auger motor & gearbox. (AES #MF3573)
www.surpluscenter.com/item.asp?Item=5-1740

This is the agitator motor & gearbox. (AES #MF3540)
www.surpluscenter.com/item.asp?Item=5-1737

Thanks for your help! But these links say no longer available.

Sorry... I thought maybe they just took them off the website but would have the products if you called them. Maybe not though

Good Morning.
As far a parts and motors usually check with Surplus and they seem to not have surplus motors for Corn Stoves.
As an added note (for my 3500P) when I went to replace the exhaust motor, had to buy the entire assembly. Why you ask? Because AES says remove the assembly, remove impeller by loseening the hex on the shaft and remove the impeller and then take off the motor. BIG PROBLEM AND FOUND THIS OUT THE HARD WAY---YOU CANNOT EVER LOOSEN THE IMPELLER--HEX AND IMPELLER ARE FROZEN DUE TO EXHAUST FUMES, ASH, AND HEAT. SO YOU NEED TO BUY COMPLETE ASSEMBLY. I HAVE ATTEMPTED TO MODIFY THE ASSEMBLY WITH CONCENTRIC RINGS TO REMOVE MOTOR AND IMPELLER W/O REMOVAL OF ASSEMBLY. THEN CAN WORK ON IMPELLER AND MOTOR ON BENCH FOR REMOVAL AND REASSEMBLY. THIS IS MY ISSUE WITH THAT MOTOR IF THAT HELPS.

Thanks for all your thoughts. Guess I'm shopping at usstove.

I bought an auger motor on amazon.com this year.