Good luck on the part's Hunt:)

Here's some grainger part numbers I couldn't get the pic's loaded that had all the info but you can go online and check it out Part numbers are 6FHX9 and 4KA72

Got blower from grainger hooked up perfectly! I got control from wisconcin and only come with computer board and having problems finding what the plug in r have cord and plug from stove but the other conections r problem with here r some pics, goi g to build box for it tonight becouse i dont have the one for the stove!

having problems adding pics will try again later

Pics of the control board

Pics of the control board and i added some arrows!!
thanks!

fired stove up for first time (trial by error) every thing went great except augers didnt kick on ! frustrating but heated up house better then furnace !
with 4 jumper wires i think i figured all the conection out !
1) main room blower
2)main power
3)exhaust fan power
4)2 connectors for up & down temps

still have a little push button in middle of board that seems to do nothing !
going to by pass safety switch on fill door and see if that fixes augers !
ran for 15 minutes and put temp in house up 10 degrees amazing (feeeding by hand )!
thanks for the help exhaust blower from grainger worked perfectly !will try to add pics again tomorrow!

door switch wires ran to front of stove! cut and tied them together one auger is working great !second auger needs a resister that was broke off board when i got it trying to find this and i will be done !
2200 square foot home running temp at 70degrees (hard pellets )running on auger speed 3.0 medium i guess !

dont know what #s are says 35.5 then flashes to auger speed !
auger speeds go from low at 5.0 to 12.5

is there a problem why i cant post pics of control board ????