is there a problem why i cant post pics of control board ????

door switch wires ran to front of stove! cut and tied them together one auger is working great !second auger needs a resister that was broke off board when i got it trying to find this and i will be done !
2200 square foot home running temp at 70degrees (hard pellets )running on auger speed 3.0 medium i guess !

dont know what #s are says 35.5 then flashes to auger speed !
auger speeds go from low at 5.0 to 12.5

fired stove up for first time (trial by error) every thing went great except augers didnt kick on ! frustrating but heated up house better then furnace !
with 4 jumper wires i think i figured all the conection out !
1) main room blower
2)main power
3)exhaust fan power
4)2 connectors for up & down temps

still have a little push button in middle of board that seems to do nothing !
going to by pass safety switch on fill door and see if that fixes augers !
ran for 15 minutes and put temp in house up 10 degrees amazing (feeeding by hand )!
thanks for the help exhaust blower from grainger worked perfectly !will try to add pics again tomorrow!

Pics of the control board and i added some arrows!!
thanks!

Pics of the control board

having problems adding pics will try again later

Got blower from grainger hooked up perfectly! I got control from wisconcin and only come with computer board and having problems finding what the plug in r have cord and plug from stove but the other conections r problem with here r some pics, goi g to build box for it tonight becouse i dont have the one for the stove!

going to get ahold of golden grain dealer tomorow also there exhaust blower is the same damensions as mine cfm and all !

just found a store on craigslist that is selling ao-120!
they have manual that i can get and most of the parts were made by grainger!
exhaust blower is 326cfm part list says #80016176 so hoping this part is from grainger? will post back when i find out tomorrow !

thanks this is the place i ordered the control from !
They say its impossible to find any kind of owners manual on this !
the exhaust blower is the only thing im missing now ,they said they didnt have any info on what size it is !(rpm)(cfm)

i measured the holes for blower !
round hole is 5"1/2" hole at heat exchanger ,in flow
square hole is 4"x4" hole for exhaust chimney hole!out flow

i just found this pic on i burn corn old site !

Here r some pics, no wheels but they could be put on, i think i will

this is a furnace addon !biomass
any info would help !
control settings,has duel augers 35,000btus to 100,000btu
googled and evryone says its a nice stove but that is as far as they go anyone ever heard of it !
made in michigan
i have to build a clean out door and replace glass in main door other then that
it doesnt have a scatch!

does anyone have specs or any info on great lakes AO-120!
i may have made a mistake i just bought this and ordered a controller for it !
and found out company shut down and hard to find parts for !everything is there
but have no power cord ,so trying to figure out wireing !
the stove is brand new never been fired payed 450.00 and 300.00 for controller
thanks Rich!