how do you jump them? Just put a piece of metal conecting them? Make them connect like that??

Thanks. I'm glad it's working too but now it's short cycling. Turns on for 10 seconds and off for 10. I wish I knew what the heck I was doing lol

So I got my convection blower working. It turns on for 10-15 seconds then shuts off for 10 seconds then on again. It keeps doing this. Any suggestions? Thanks

Well it seems to be working now. I cleaned it out. And it wasn't working. I played with the snap disk and jumped it. Cause it started working for a min then stopped. I changed out the snap disk to the new one. It was working right away, then stopped. I moved the connection a bit and it's working now. I don't know if it was just the cleaning or the connections or what but it's working now. I hope it keeps working. Thanks

how would I do that?

I am in need of some help. I've got an older MT Vernon. There is no digital screen or anything. My stove wasn't working and sitting unused for a couple years. We've decided to try and get it up and running again. So we changed the thermal couple, the auger wouldn't work so I changed the snap disk #2 and got that working. Now everything seems to be firing great and running proper except the convection blower isn't turning on. I changed snap disk #1 thinking it might be that but even with a new one installed it's not running. I am going to try and pull it apart and vaccum it out today to see if it's just super dirty or something stuck in it. Other than that I don't know why it's not working. It was blowing before the whole thing stopped working. But that was cause of the thermal couple and the snap disk not cause the blower? Is there anything else that could be the issue? Could there be something else I could do before having to go get a new one?