Already did that. 0V between the white, red, yellow and feed motor black wires. Control Board problem?

I've unplugged and plugged in the unit several times, with the same results, the combustion motor rotates freely. If there is an open circuit to the motor that will prevent the remaining components in series from turning on?

I have a Harman Accentra Insert stove that is approx. 8yrs old. It's worked fine with a few minor clithches up until about 5 days ago. I had just completed cleaning the burn pot and ash pan. The unit restarted properly and was running fine, the next morning I look at the stove its out, stone cold, but the LED's for the combustion blower,feed auger and ignitor are all on. None of these items are working, the auger won't feed, no combustion blower, and the ignitor won't light. Anybody run into this problem before?