Thanks for responding,
Been busy last few days. Stove has been cold.
Anyway here's the latest.
I jumped all the snap discss & jumped the vac switch.
Exhaust blower works fine.
The Combustion blower works when I jump the disc.
Feed light comes on when I push the thermostat up.

Still no auger.
I tried running 120v straight to auger motor and popped breaker.
Too much? I thought I had red/white wires correct.
Could auger motor be seized? I can't turn the auger. Should it turn manually?

Thanks

Hi Everyone,
This seems like a common problem but it may be unique enough.
I have a CB 1200 that has been working great for 16+ years (24/7 from Nov-April every year).
Never had any serious problems (except door gasket, TC cover, fuse, etc)
Two weeks ago we had a power outage and when it came back my CB 1200 kept blowing the fuse everytime exhaust blower motor kicked on. (Motor wasn't siezed or smelled)

I orderred new motor (while waiting, clean old motor thoroughly) and now doesn't blow fuse.
However auger doesn't kick on when move thermostat.

I cleaned vacuum, and vent pipe. Put meter on wires to auger motor and no juice.

Is this the controller? Anything else I can check? This is the old "gray" box with only green/red lights.

Stove was working perfect before power outage.

Could a surge fry the controller? Fuse in controller box is NOT blown.

Thanks for any suggestions.